Mold Man® 8000

The Mold Man® 8000 has been discontinued. Please contact MoldMan Systems for support of your existing Mold Man® 8000. For more information, please refer to the link below.

Mold Man® 8000 Discontinuation Letter

Contact Us


Mold Man® 8000TP


Designed for production runs around 250,000 units per year
Extremely user-friendly operation. No special training required to operate
Mold up to four cavities at the same time (depending on part size)
Fully independent adjustable process control
Precisely meter shot sizes
Accurately control flow rates
Exact pressure control
Patented permanent nozzle engagement for fewer moving parts
Soft close safety feature
Safety features like two-hand-no-tie-down actuation, key lock for set-up or production mode, misplaced/foreign object sensing, low initial clamping pressure, and more


Height 1625 mm / 64.0”
Width 1040 mm / 41.0”
Depth 740 mm / 29”
Weight 430 kg / 950 lbs
Voltage AC 208-230 V, Single Phase, 50/60 Hz
Power 4000 W
Air Pressure 8-10 bar / 115-145 psi
Air Volume 120 lpm / 4 SCFM
Clamp Pneumatic
Clamping Force 10 kn / 1 ton
Clamp Stroke 150 mm / 6”
Ejector Pneumatic
Mold-set Dimensions 200 mm x 150 mm / 8” x 6”
Injection Nozzle Patented Permanent Engagement
Mold-set Cooling Cross-drilled mold platens
Melt Reservoir 10 liter (10 kg) / 22 lbs self draining
Melt Temperature Up to 245° C / 475° F
Injection Pressure 1-30 bar / 15-450 psi
Shot Size 0.5-100 grams / 0.02-3 ounces, typically
Molding Cycle PLC controlled: standard or advanced injection profiles
Operator Display Touch screen interface with all molding parameters and cycle counter, customizable alarm screens, imperial or metric units


Castor Kit Adds 127 mm / 5” to height. Kit includes four castors with mounting hardware
Double Clamping Cylinder Mold-set Cooling Kit Includes chiller, hoses and fittings